August 3, 2018 Headboard & Footboards

Making Bunkie Board for Berth

The height of bunk bed, with the superficiality of the side rails, made using standard springs impractical and dangerous. The remedy for this situation is called Bunkie board. A Bunkie replace the box spring and mattress support provides.

Instructions to build Bunkie board for berth: measure the inside dimensions of the area of bedding litter. Mark each sheet of plywood. Cut along each of the lines. Apply grid of construction adhesive to the wood. Space accounts adhesives 4-inch apart each way.

Lay a second piece of plywood over the first. Apply adhesive to the second sheet timber and place the final sheet on top of the stack. Maneuver the three pieces of plywood to the edges of the stack. Leave the battery overnight to allow the adhesive to fully cure.

Remove the bricks of the Assembly of plywood. Apply construction adhesive on top of the plywood. Cut a piece of foam 3-inch to fit the plywood. Press the foam adhesive. Lay a large piece of fabric over the foam over the whole. Flip assembly and push the edges of the fabric around the back of the timber.

Finally, to build Bunkie board for berth, place a staple every 3-inch around the edge of the fabric. Cut the fabric as needed.

Tags: plywood bunkie board, how to build a bunkie board, make a bunkie board, how to make a bunkie board, build a bunkie board, make a bunky board, make bunkie board

Comments are closed.

https://www.ozvisuals.com -->